Handheld Pulse Oximeter SpO2 Sensor - CE and FDA(PM 60A)Instructions
Principle of the PM60A Patient Monitor is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology, the Patient Monitor can be used in measuring the pulse oxygen saturation and pulse rate through finger. The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc.Main performance
1.Display Mode: 3.5" Color TFT display
2.Screen Resolution: 320*240
3.SpO2 Measuring Range: 0%~100%, (the resolution is 1%).
4.Accuracy: 70%~100%: ± 2%, Below 70% unspecified.
5.PR Measuring Range: 30bpm~250bpm, (the resolution is 1bpm)
6.Accuracy: ± 2bpm or ± 2% (select larger)
7.Measurement Performance in Weak Filling Condition:
8.SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ± 4%, pulse rate error is ± 2 bpm or ± 2% (select larger).
9.Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ± 1%.
10.Power Consumption: Less than 300mA
Voltage: DC 5.0V
11.Power Supply: Built-in recharge Li-Polymer
12.Battery working hour: 7 hours
13.Safety Type: Interior Battery, BF TypeAccessories
Sell in standard:
1.A user manual
2.A power adapter (GTM41076-0605; CMS0105)
3.A data line
5.A disk (PC software)
6.An oximeter probeSell in addition:
Other oximeter probe(Refer to probe application instruction for details and notice renewal)Physical Identity
Weight: About 136g(with battery)Qualification