4 Channel Electromyography/Emg Equipment Emg/Ep System Nursing Equipment
Model:CMS6600B Brand:CONTEC
Features:
1.Professional EMG/EP operation platform and perfect test items, complete each test in the shortest time.
2.Neuro and muscle navigation system, convenient in selecting test part.
3.Powerful normal values system, contrast with normal data automatically.
4.Flexible software design, configure system parameters according to requirements.
5.High-speed data collection, electromagnetic interference suppression, Photoelectric isolation and low noise.
6.Integrative hardware system, compact in configuration and easy in moving.
Performance:
1.Main system part
2.A/D conversion resolution 16 Bit
3.Sampling ratio 200kHz
4.Analysis time 5-5000ms
5.Stimulating frequency 0.1-50Hz
6.Amplifier part
7.Four-channel
8.Sensitivity 0.05μ V-20mV/Grid
9.Earth noise EMG <= 4μ V(Vpp)
10.EP <=0.1μ V(Vpp) (1000 times in average)
11.Common-mode rejection ratio >= 100dB
12.50Hz Ban wave setting:
13.Upper limit for Filter-frequency 20kHz
14.Lower limit for Filter-frequency 1Hz
15.Gain amplifies 25 times-400000 times
16.Stimulator part
17.Constant current 0.2-100mA
18.Pulse width 50-1000μ S
19.Short circuit and overloading protection
20.Auditory Stimulator
21.Stimulation wave 40Hz Short, Sound Stim
22.Stimulation polarity nondense wave, dense wave and alternant wave.
23.Sound strength 40-120db (5db per level)
24.Stimulation mode left, right, left & right
25.Frequency of 40Hz carrier wave 500-8000Hz
26.Visual stimulator
27.Mode tessellation, horizontal bar and vertical bar.
28.Stimulation view all-view, half-view and quarter-view
29.Resolution 3x4, 6x8, 12x16, 24x32, 48x64
30.Flash stimulator all quench, left light, right light, l&r light
Accessories:
1. Disk
2. Power Cord
3. Power Adapter
4. USB Cable
5. Audio Cable
6. Earth Cable
7. Current Stimulator
8. One-off Bipolar Needle Electrode D039035408, 0.35*40mm, D039060706, 0.60*70mm
9. Reuseable Bipolar Needle Electrode R039035408, 0.35*40mm, R039060706, 0.60*70mm
10. Concentric Needle Connecting Wire
11.1mm Connecting Lead Wire
12. Disc Electrode
13. Ring Electrode
14. Surface Electrode
15. Ground Electrode(Include lead cable)
16. One-off Unipolar Needle Electrode
17. From 1 to 2 Conversion Cable
18. Surface Electrode Conversion Cable
19. Fuse 0.1A/250V, 5*20mm
20. Fuse F1.6AL250V, 5*20mm
21. Flash Stimulator
22. Audio Stimulator
Physical characteristic:
Dimension 420mm*350mm*46mm(L× W× H)
Net weight 6KG
1.How many waveforms can be displayed on the screen?
The screen can display up to a maximum of 10 waveforms.
2. What types of batteries are used?
It uses built-in rechargeable lithium battery.
3.How many kinds of languages can it support?
Chinese, Englisn and Spanish.
4.How about the supply time?
At least 7 hours when the monitor without internal CO2 module is powered by new fully-charged batteries at 25°C with factory default screen brightness, Wi-Fi disabled, ECG and SpO2 cable connected, and auto NIBP measurements at an interval of 15 minutes.
5.How is charging time?
90 %: about 6 hours, fully charged: 8 hours
6.What can the Multi-function Interface be used for?
A It can be used as a nurse call interface. When connected with the hospital's call system, if an alarm occurs, it can output the nurse call signal to remind the nurse.
B It can be used as ECG analog signal output interface to output analog signal for oscilloscope and other equipment.
C It can be used as communication interface to communicate with external equipment.
7.What is the device working life?
10 years.
Audited Supplier 
4 Channel Electromyography/Emg Equipment Emg/Ep System Nursing Equipment
){kind=link}
){kind=link}